| Support | | Repair form | | Return Policy | | Warranty | | Price List | | Payment Options | | | Contact Us | | Job Opportunities | | Our Technology |
|
Controls
|
LED Fixtures
|
Battery Pack
|
Power Supplies
|
Documents
|
| ColorCue | PX250 | D1210 | GL12800 | Youtube links |
| CM-T10-PROE | PX500 | D1220 | GL25000 | |
| DMX-Link | PX750 | PD12-8 | ||
| PX-T10 NEW | Octagon | |||
| ColorFx NEW | DL75 |
Third Party Controllers
|
Accessories
|
Price List |
|
Fixture / Battery Package
|
CB2420 ColorBlast 12 | Fixture Stand | Battery Care Sealed Lead Acid | |
| PX250 / D1210 |
OEM Receivers
|
Fixture Stand LP | Battery Care Ni-MH | |
| PX500 / D1220 | PX-RGB-DMX | Battery Chargers | Remote Case | Compare Fixture |
| PX750 / D1220 | PX-RGB-LED | Compare Battery Pack | ||
| Software Upgrade Upgrade Form |
|
 |
|
The CM-T10PROE is a simple easy to use remote with large buttons and LED display. Its as simple as selecting a fixture and changing the colors with red, green and blue UP/Down buttons. LED will display the value from 0 to 100% for each color. User programmable scenes and ColorRolls made easy with just a few simple programing steps. CM-T10PROE is compatible with all ColorMaker wireless LED fixtures. CM-T10PROE can control up to 90 individual fixtures up to 400 feet. |
 |
|
ColorCue was designed for user that require simple easy to learn remote that can be handed to rental clients with a just a few simple commands. "Select a fixture" and "choose a color". Color presets are programmable if the user does not like the factory default colors. User can also use the RGB Up/Down buttons to change fixture colors to one of 16 million colors. The ColorCue can control up to 8 individual fixtures or unlimited on the same address. ColorCue has 1 ColorRoll and 1 scene button. |
 |
|
PX-RGB-DMX is a wireless receiver that will communicate with all ColorMaker remote RF transmitters. The radio signal from the remote is converted to a DMX signal and can be used to control any RGB LED fixture with a DMX input. All Colormaker technology including ColorRoll , Color Effects and Auto Programming are coded into the PX-RGB-DMX dongle. The DMX output is through a 3 pin XLR connector. The design is small and compact and in most cases the PX-RGB-DMX dongle can connect directly to the DMX jack on the LED fixture with a short barrel connector. The PX-RGB-DMX can be powered by 12 volt AC adapter or 9 volt battery for 100% wireless operation. |
  |
|
PX-RGB-LED is a wireless receiver that will communicate with all ColorMaker remote RF transmitters. Small compact design will drive any 12 volt LED cluster or strip. All Colormaker technology including ColorRoll , Color Effects and Auto Programming are coded into the PX-RGB-LED dongle. Common Anode LED's connect to removeable terminal block. The PX-RGB-LED is powered by 12 volt from a 2.5 mm power jack or hard wired to terminal block. Each output can drive up to 2 AMPS for a total output of 6 AMPS. |
 |
|
PX Series is the next generation of wireless LED fixtures and controls designed and manufactured by ColorMaker in the USA. The PX series devices features our new custom flash processor that are user programmable. LED technology has come along way since its introduction in the early 80's and with current technology there are more colors, brighter dies and longer life.
Available in 30 degree (spot) or 60 degree (Flood) |
 |
 |
|
Shown with D1210 battery
|
||
|
PX Series is the next generation of wireless LED fixtures and controls designed and manufactured by ColorMaker in the USA. The PX series devices features our new custom flash processor that are user programmable. LED technology has come along way since its introduction in the early 80's and with current technology there are more colors, brighter dies and longer life.
Available in 30 degree (spot) or 60 degree (Flood) |
 |
 |
| Shown with D1220 battery | ||
 |
 |
||
| PX Series is the next generation of wireless LED fixtures and controls designed and manufactured by ColorMaker in the USA. The PX series devices features our new custom flash processor that are user programmable. LED technology has come along way since its introduction in the early 80's and with current technology there are more colors, brighter dies and longer life.
Available in 30 degree (spot) or 60 degree (Flood) |
Shown with D1220 battery
|
||
 |
|
|
Wireless LED fixture with 8 individual controlled LED clusters. Packed with Colorful Effects all controlled with a wireless remote. Octagon measures only 12 inches wide and 2.2 inches tall all powered by internal rechargable battery for up to 8 hours of run time. The Octagon can also be powered by external power supply for longer run times or perminant installations.
Applications include Centerpiece light, lighted dance floor, direct view effects lights, You are only limited by your imagination..... |
   |
|
|
DMX wireless interface for ColorMaker series LED fixtures. Control up to 32 individual Color LED fixtures with DMX512 or an unlimited when set on same address. Requires 3 DMX channels for each fixture.
No special codes, the DMX Link will give you complete control of RGB levels of each fixture just change the DMX channel value and the fixture will follow. Operating range of 400 feet. Easy to use Plug and Play system. DMX input through 3 pin XLR connector. |
 |
|
Now you can go wireless with your ColorBlast 6 and 12 fixtures. The CB2420 is a self contained battery pack and wireless receiver in one portable package. The CB2420 can be controlled with any one of the ColorMaker series transmitters which include several hand held wands and interfaces for DMX. All the features found in the ColorMaker line of LED fixtures are incorperated in the CB2420 including ColorRoll and Auto addressing.
|
 |
|
Portable Power pack provides 100% wireless operation. The D1210 will power the PX250 for 10 hours before requiring a recharge. Power pack contains two 5A SLA batteries that can be recharged in less than 5 hours. Fixture can be mounted directly to D1210 enclosure for easy portability. External resetable fuse.
|
 |
|
Portable Power pack provides 100% wireless operation. The D1220 will power (two) PX250 for 10 hours or (one) PX500 for 10 hours before requiring a recharge. Power pack contains Four 5A SLA batteries that can be recharged in less than 7 hours. Fixture(s) can be mounted directly to D1220 enclosure for easy portability.
Dual outputs - External Resetable fuse |
 |
 |
 |
 |
 |
 |
 |
 |
|
PCON1-12 (1 foot )
PCON1-120 (10 foot ) |
KB40 Fixture Knob
|
Quick Hardware
Set of 2 |
Fixture Stand
Standard |
Fixture Stand
Low Profile |
Rubber Boot
|
Remote Case
CM-T10 and PX-T10 |
|
Power supples for ColorMaker Series LED fixtures. UL rated 12v DC. 2.5 MM power jack with 6 foot wire. Center pin on jack is positive. input voltage 100-220 50-60 Hz.
|
 |
 |